High Temperature

This paper describes the summary of a three-year development program for the first-stage stationary vane and rotating blade for the next generation, 1500°C class, high-efficiency gas turbine. In such a high-temperature gas turbine, the first turbine vane and blade are the most important hot parts. Full-coverage film cooling (FCFC) is adopted for the cooling scheme, and directionally solidified (DS) nickel base superalloy and thermal barrier coating (TBC) will be used to prolong the creep and thermal fatigue life. The concept of the cooling configuration, fundamental cascade test results, and material test results will be presented.

We calculate the incoherent resonant and non-resonant scattering production of sterile neutrinos in the early universe. We find ranges of sterile neutrino masses, vacuum mixing angles, and initial lepton numbers which allow these species to constitute viable hot, warm, and cold dark matter (HDM, WDM, CDM) candidates which meet observational constraints. The constraints considered here include energy loss in core collapse supernovae, energy density limits at big bang nucleosynthesis, and those stemming from sterile neutrino decay: limits from observed cosmic microwave background anisotropies, diffuse extragalactic background radiation, and Li-6/D overproduction. Our calculations explicitly include matter effects, both effective mixing angle suppression and enhancement (MSW resonance), as well as quantum damping. We for the first time properly include all finite temperature effects, dilution resulting from the annihilation or disappearance of relativistic degrees of freedom, and the scattering-rate-enhancing effects of particle-antiparticle pairs (muons, tauons, quarks) at high temperature in the early universe.

Camels usually inhabit remote areas, where diagnostic facilities and laboratories are very scarce. The species differences between the camel and other domestic animals necessitate some specific examination techniques. The objective of this study was to describe the clinical examination methods and sources of common errors that require special consideration in the camel. Young camels are examined in the standing position, while adults require restraint. Restraining procedures, both standing and in sternal recumbency, are described. New equipment and a crush were designed. The body temperature of the camels examined fluctuated from 35.7 to 38.9°C, being lowest in the morning and highest in the afternoon; high temperature in the morning is indicative of fever, while high afternoon temperatures could be hyperthermia. It was difficult to take the pulse rate for routine procedures. The heart rate ranged from 35 to 50 per min; there was no difference between the heart rate in the morning a...

The PEBBED code was developed at the Idaho National Laboratory for design and analysis of pebble-bed high temperature reactors. The diffusion-depletion-pebble-mixing algorithm of the original PEBBED code was enhanced through coupling with the THERMIX-KONVEK code for thermal fluid analysis and by the COMBINE code for online cross section generation. The COMBINE code solves the B-1 or B-3 approximations to the transport equation for neutron slowing down and resonance interactions in a homogeneous medium with simple corrections for shadowing and thermal self-shielding. The number densities of materials within specified regions of the core are averaged and transferred to COMBINE from PEBBED for updating during the burnup iteration. The simple treatment of self-shielding in previous versions of COMBINE led to inaccurate results for cross sections and unsatisfactory core performance calculations. A new version of COMBINE has been developed that treats all levels of heterogeneity using the...

The de Haas-van Alphen effect was observed in the underdoped cuprate YBa2Cu3O6.5 via a torque technique in pulsed magnetic fields up to 59 T. Above a field of approximately 30 T the magnetization exhibits clear quantum oscillations with a single frequency of 540 T and a cyclotron mass of 1.76 times the free electron mass, in excellent agreement with previously observed Shubnikov-de Haas oscillations. The oscillations obey the standard Lifshitz-Kosevich formula of Fermi-liquid theory. This thermodynamic observation of quantum oscillations confirms the existence of a well-defined, closed, and coherent, Fermi surface in the pseudogap phase of cuprates.

Room temperature internal friction (Q sup-1) values of the 0.00002-0.00003 range were achieved with lunar rock 70215,85 by thorough outgassing procedures in ultrahigh vacuum. Results are presented on the temperature dependence of Q-1 as measured in the range 25 C to 600 C along with some data on the change in Q-1 with pressure in ultrahigh vacuum. The temperature dependence shows the existence of an internal friction peak at around 200 C followed at high temperatures by an extensive region with flat Q-1 (approximately 0.001); the work at ultrahigh vacuum shows decreases in the internal friction with decreases in ambient pressure even in the range 10 to the -8 to 10 to the -10 power torr.

Embedded resistor circuits have been generated with the use of a Micropen system, Ag conductor paste (DuPont 6142D), a new experimental resistor ink from DuPont (E84005-140), and Low Temperature Co-fired Ceramic (LTCC) green tape (DuPont A951). Sample circuits were processed under varying peak temperature ranges (835°C–875°C) and peak soak times (10 min–720 min). Resistors were characterized by SEM, TEM, EDS, and high-temperature XRD. Results indicate that devitrification of resistor glass phase to Celcian, Hexacelcian, and a Zinc-silicate phase occurred in the firing ranges used (835–875°C) but kinetics of divitrification vary substantially over this temperature range. The resistor material appears structurally and chemically compatible with the LTCC. RuO2 grains do not significantly react with the devitrifying matrix material during processing. RuO2 grains coarsen significantly with extended time and temperature and the electrical properties appear to be strongly affected by the change in RuO2 grain size.