Nickel

Weld cladding is a process for producing surfaces with good corrosion resistant properties by means of depositing/laying of stainless steels on low-carbon steel components with an objective of achieving maximum economy and enhanced life. The aim of the work presented here was to investigate the effect of auxiliary preheating of the solid filler wire in mechanized gas metal arc welding (GMAW) process (by using a specially designed torch to preheat the filler wire independently, before its emergence from the torch) on the quality of the as-welded single layer stainless steel overlays. External preheating of the filler wire resulted in greater contribution of arc energy by resistive heating due to which significant drop in the main welding current values and hence low dilution levels were observed. Metallurgical aspects of the as welded overlays such as chemistry, ferrite content, and modes of solidification were studied to evaluate their suitability for service and it was found that claddings obtained through the preheating arrangement, besides higher ferrite content, possessed higher content of chromium, nickel, and molybdenum and lower content of carbon as compared to conventional GMAW claddings, thereby giving overlays with superior mechanical and corrosion resistance properties. The findings of this study not only establish the technical superiority of the new process, but also, owing to its productivity-enhanced features, justify its use for low-cost surfacing applications.

The potential of Pleurotus ostreatus spent mushroom compost (PSMC) as a green biosorbent for nickel (II) biosorption was investigated in this study. A novel approach of using the half-saturation concentration of biosorbent to rapidly determine the uptake, kinetics and mechanism of biosorption was employed together with cost per unit uptake analysis to determine the potential of this biosorbent. Fifty per cent nickel (II) biosorption was obtained at a half-saturation constant of 0.7 g biosorbent concentration, initial pH in the range of 4–8, 10 min contact time, 50 mL 50 mg/L nickel (II) initial concentration. The experimental data were well fitted with the Langmuir isotherm model and the maximum nickel (II) biosorption was 3.04 mg/g. The results corresponded well to a second pseudo order kinetic model with the coefficient of determination value of 0.9999. Based on FTIR analysis, the general alkyl, hydroxyl or amino, aliphatic alcohol and carbonyl functional groups of biosorbent were...

This paper describes the summary of a three-year development program for the first-stage stationary vane and rotating blade for the next generation, 1500°C class, high-efficiency gas turbine. In such a high-temperature gas turbine, the first turbine vane and blade are the most important hot parts. Full-coverage film cooling (FCFC) is adopted for the cooling scheme, and directionally solidified (DS) nickel base superalloy and thermal barrier coating (TBC) will be used to prolong the creep and thermal fatigue life. The concept of the cooling configuration, fundamental cascade test results, and material test results will be presented.

There is accumulating evidence that the metabolism of several trace elements is altered in diabetes mellitus and that these nutrients might have specific roles in the pathogenesis and progress of this disease. The aim of present study was to compare the level of essential ...

Early interest in metallic plutonium fuels for fast reactors led to much research on plutonium alloy systems including binary solid solutions with the addition of aluminum, gallium, or zirconium and low melting eutectic alloys with iron and nickel or cobalt. There was also ...

The cell-cell adhesion molecule 1 (C-CAM1) plays an important role as a tumor suppressor for prostate cancer. Decreased expression of C-CAM1 was detected in prostate, breast, and colon carcinoma. Reexpression of C-CAM1 in prostate and breast cancer cell lines was able to suppress tumorigenicity in vivo. These observations suggest that C-CAM1 may be used as a marker for cancer detection or diagnosis. To generate monoclonal antibodies specific to C-CAM1, we have overexpressed full-length human C-CAM1 in Sf9 cells using a baculovirus expression system. The protein was purified 104-fold using nickel affinity chromatography. About 0.4 mg purified C-CAM1 was obtained from 200 mg of infected cells. When the purified protein was digested with peptidyl-N-glycosidase, the apparent mobility of the protein on SDS-PAGE changed from 90 to 58 kDa, which is close to the molecular weight predicted from the cloned cDNA sequence. This observation suggests that C-CAM1 was glycosylated on asparagine residues when expressed in Sf9 cells. Western blotting and internal protein sequencing analysis confirmed that the purified protein is human C-CAM1. Biochemical and functional assays indicate that this protein expressed in Sf9 cells displays characteristics similar to those of native protein, including adhesion function and glycosylation modification. Using this protocol, sufficient quantity of this protein can be produced with purity suitable for monoclonal antibody generation and biochemical study.

In this paper we report on the formation of nickel silicide by electroless process. The nickel plating solution was composed of a mixture of NiSO4·6H2O, NaH2PO2·H2O, Na3C6H5O7, and NH4Cl, where NiSO4·6H2O is the main nickel source and NaH2PO2·H2O is the reducing agent. The nickel silicide formation was carried out by heating the deposited samples in vacuum at temperatures from 100 °C to 800 °C. The evolution of NiSi phase from the nickel film was verified using the X-ray diffraction technique and Raman spectroscopy. The surface morphology was studied using AFM technique. The electroless plating technique can provide a cheap and easy process for forming nickel silicide, and has potentiality of application for the electronic device industries.

This paper presents the possibility of removing metal ions by applying the hybrid complexation–ultrafiltration process. The research was conducted on model solutions containing Zn(II) and Ni(II) ions. The complexing agent applied in the research was sodium ...

The bagasse fly ash, an industrial solid waste of sugar industry, was used for the removal of cadmium and nickel from wastewater. As much as 90% removal of cadmium and nickel is possible in about 60 and 80 min, respectively, under the batch test conditions. Effect of various operating ...